Wedge Wire Flat Panel Screen Curved Screen Made in China

• Customization: Available
• Material: Metal
• Layers: Single
• Model NO.: GX219
• Usage: Liquid Filter
• Type: Filter Disc
• Hole Shape: Round
• Structure: Single Network
• Wire Profilte: 1.5*2.5mm
• Support Bar: 2*3mm
• Slot Size: 0.38mm
• Dimension Size: 1000*3000mm
• Transport Package: Wooden
• Specification: 1000*3000mm
• Trademark: GUANGXING
• Origin: Hebei, Hengshui, China
• HS Code: 8421999090
• Production Capacity: 100000

Product Description

Product Description

Wedge Wire Screen Curved Screen made in China 

Material: AISI316L, AISI304, Others

Specification:

1. The Arc angle of the screen: 120°or as client's request
2. The slot: usual slot size: 50μm, 75μm, 100micorn, 200 micron, or as client's request.
3. The flow rate: 34-46 M3/H
4. Working Pressure: 0.2-0.4Mpa
5. Sieve bend Screen Width: 585mm, 710mm, 825mm, others according to client's request
6. The sieve bend screen arc radius: 762mm
 

Detailed Photos

Product Parameters

The working principle and the structures of the screen

pressure curved sieve is a kind of the high efficiency working screen that working by the pressure, and it is make up with the sieve screen, the sieve case, feeding device and exit device.

The sieve screen is the key part of the pressure sieve bend screen. It is made by stainless steel wedge wire and support wire.
When the working pressure is 0.2-0.4Mpa, the wet material will be erupt from the exit device.
The wedge wire could become the knife edge, it could help to shaving the material to a thin layer, and make the fine material and water Evenly spread out.
Reading of the "shaving effect". It will help to grading easily, Then all the screen should cleaned. The surface material will be expel from the dross hole, and the fine material will enter the stock outlet.

The process conditions and affecting the sieving effect factors
The working pressure must be 0.2-0.4Mpa, the higher pressure, the higher sieve efficiency. Inverse, the lower pressure, the lower siece efficiency.
 

Material	SS304, SS304L, SS316, SS316L, SS321, Duplex, Hastelloy, etc
OD Range	19mm-2000mm
ID Range	13mm-1981mm
Length Range	Up to 6000 mm
Slot Range	20 micron to 3000 micron (Tolerance:+-5 micron)
Wedge Wire	0.5x1.5	0.75x1.5	1x2	1.5*2	2x3	2*4	3*5
Support Rod	1.5x2.5	1.5x2.5	1.5x2.5	1.8*2.5	2x3	2x4	3x5
	2x3	2x3	2x3	2x3	2x4	3x5	3x6
					3x5	3x6	3x10
					3x6	3x10	4x7
					3x10	4x7	5x6
					4x7	5x6	5x8
End Finishing	Thread fitting, Flange, Closed Plated, Resistance welded closed plate, Metal Ring, etc
Note	Customized According To Requirement

At the first sieve process, it will content about 7% fine dry material, then sieve the starch milk.
10-11BX, in the thin pulp, the SO2 content will be about 0.035-0.045%

Key Words: Pressure Sieve Bend Screen, Pressure Sieve screen,Hydraulic screen, Gravity curved screen, sieve bend scree, 120 degree sieve bend pressure screen, slot screen, curve screen, Gravity Sieve

Sieve plate, Sieve Bend screen for starch, Wedge wire screen, Corn water screen
 

Material:	stainless steel (304,316etc.)
Wedge Wire (mm):	Width : 0.75 1.50 1.80 2.30 3.00 3.30 3.70
Support Rod (mm):	Width : 1.00 1.80 2.00 3.00 4.00 5.00
	Height : 2.00 2.50 3.00 5.00 6.00 8.00
Width:	Width Up To 2.5 meters
Diameter	As your need
Slot size:	0.02,0.05,0.1 0.15, 0.20, 0.25, 0.30,….., 3.00 also achieved upon request.