| Customization: | Available |
|---|---|
| Material: | Metal |
| Layers: | Single |
|
Still deciding? Get samples of US$ 100/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
hengshui guangxing sieve bend screens are used in static sieves for either dewatering or classification of materials. It separates solids from liquids, the curved screen of a sieve bend provides greater capacity than flat wedge screens due to increased gravitational forces on material flowing against the curve. This successive wires and rods welding assembly creates a sieve, which presents more edges to the flow for superior separation efficiency.
Dewatering and classification capability of the screen is determined by the percentage of open area. Wedge Wire sieve bend screens can be made and designed for wide ranges of industries.
Sieve Bend Screens, also known as side hill screens, parabolic screens, run down screens, gravity screens and DSM screens, can be custom designed to separate solids from liquids in various applications including food processing, pulp and paper, waste water cleanup, surface water intakes, corn wet milling, coal preparation, and gold recovery.
Sieve Bends are cross-flow screens. The profile wires are slightly tilted so that the leading edge is position higher which greatly increases the dewatering capacity.
1. Sieve Bend Screener with high feed inlet
2. Sieve Bend Screener in operation
3. Sieve Bend Screener
4. Screen Bend Surface with endbars
5. Schematic of typical Sieve Bend Surface
6. Sieve Bend Screening Unit with cover
| Material | SS304, SS304L, SS316, SS316L, SS321, Duplex, Hastelloy, etc | ||||||
| OD Range | 19mm-2000mm | ||||||
| ID Range | 13mm-1981mm | ||||||
| Length Range | Up to 6000 mm | ||||||
| Slot Range | 20 micron to 3000 micron (Tolerance:+-5 micron) | ||||||
| Wedge Wire | 0.5x1.5 | 0.75x1.5 | 1x2 | 1.5*2 | 2x3 | 2*4 | 3*5 |
| Support Rod | 1.5x2.5 | 1.5x2.5 | 1.5x2.5 | 1.8*2.5 | 2x3 | 2x4 | 3x5 |
| 2x3 | 2x3 | 2x3 | 2x3 | 2x4 | 3x5 | 3x6 | |
| 3x5 | 3x6 | 3x10 | |||||
| 3x6 | 3x10 | 4x7 | |||||
| 3x10 | 4x7 | 5x6 | |||||
| 4x7 | 5x6 | 5x8 | |||||
| End Finishing | Thread fitting, Flange, Closed Plated, Resistance welded closed plate, Metal Ring, etc | ||||||
| Note | Customized According To Requirement | ||||||
){kind=link}